Table 2-2 Menu Map Structure Description - Keysight V3500A User Manual

2 Knowing your Instrument

Table 2-2 Menu map structure description

Menu Description
Averaging Sets the averaging value.
Units Sets the measurement unit. Refer to
dBm or watts" on page
Shutdown Sets the auto-shutoff interval. Refer to
backlight auto-shutoff interval" on page
BacklightOff Sets the duration prior to the backlight turning off
automatically. Refer to
page 22.
Contrast Sets the LCD display contrast.
Save State Enables or disables the save state. Refer to
the instrument state" on page
Recall State Enables or disables the recall state. Refer to
the instrument state" on page
Meas mode Selects between normal or fast mode. Refer to
"Enabling and disabling high-speed mode" on page
Firmware Rev Shows the firmware revision used in the instrument.
[1]
Serial Num Shows the numerical serial number of the instrument
(without prefix).
Rel Offset Allows users to apply an offset value to the
measurement. Refer to
function" on page
[1]
The numerical serial number displayed on the instrument is for reference only. For full serial number (with prefix), please
refer to the printed label shown in
14
"Setting units:
21.
"Setting the
22.
"Controlling the backlight" on
"Saving
20.
"Recalling
20.
"Using relative offset
23.
Figure 1-3 on page 7.
Available Values
Off, 2, 4, 8, 16, 32
dBm, Watts
1m, 5m, 30m, 1hr, Never
1m, 5m, 10m, 20m, Never
0%, 10%, 20%, 30%, 40%, 50%,
60%, 70%, 80%, 90%, 100%
No, Save
No, Recall
Norm, Fast
19.
–
–
Off, On
Default
values
Off
dBm
Never
1m
(1 minute)
50%
No
No
Norm
–
–
Off
V3500A User's Guide