Setting Units: Dbm Or Watts - Keysight V3500A User Manual

C A U T I O N

Setting units: dBm or watts

N O T E
V3500A User's Guide
All menu commands are executed immediately when the choice is
selected. Therefore, the Recall State command is implemented as soon
as the <Recall> menu item is highlighted. There is no undo option —
as soon as the <Recall> menu item is selected, the saved menu setting
overwrite the present settings.
3 Use the right arrow menu keypad to select <Recall>. This
will recall the instrument state in the non- volatile
memory of the V3500A.
• When operating the V3500A in Watts mode using the front panel, it will
display nW, µW, mW, or W accordingly.
• The instrument returns to the default dBm instrument after the
instrument is turned off.
Refer to "Units of Measurement" on page 84
on dBm and watts.
1 Press MENU to enter menu mode.
2 Scroll using the down menu arrow keypad until "Units"
menu is displayed.
3 Use the left or right arrow menu keypad to select your
desired units, either <dBm> or <Watts>.
Knowing your Instrument
for information
2
21