3
Driver Installation and Commands
Confirming the USB driver installation
N O T E
38
1 To confirm the USB driver installation is complete, go to
Start > Run (on the Windows Start menu) and type
devmgmt.msc. Click OK.
2 The Device Manager window will appear. Scroll down to
Ports (COM & LPT) and Universal Serial Bus controllers to
confirm the drivers are installed and present.
If you are using multiple Keysight instruments, you may wish to unplug all
but one, to ascertain the COM port number used by a particular
instrument. You may also differentiate similar instruments by right-clicking
on the device, viewing the Properties and the serial number of
the instrument.
Virtual COM port driver, in this
case it occupies COM6
V3500A User's Guide