Unit Of Measurement Commands - Keysight V3500A User Manual

3 Driver Installation and Commands
Command Name
Description
Syntax
Response
Comments

Unit of measurement commands

Command Name
Description
Syntax
Response
Comments
Command Name
Description
Syntax
Response
Comments
58
Set high speed mode
This command sets the V3500A to high speed mode.
HSMODE<LF>
OK
High speed mode turns off all internal averaging and filtering.
Measurement noise is higher (especially at low signal levels),
but the measurement speed is much faster.
dBm mode
This command sets the V3500A to dBm mode.
UDBM<LF>
OK
Send this command to express the remote and front panel
measurements in dBm.
watts mode
This command sets the V3500A to watts mode.
UMW<LF>
OK
Send this command to express remote measurements in units
of watts, regardless of the units displayed on the front panel.
The front panel display will express measurements in units of
watts, milliwatts, or microwatts, as appropriate.
V3500A User's Guide