Placing The Sensor - Dexcom SEVEN User Manual

2.2.3 PLACING THE SEVEN SENSOR
1. After you have cleaned the skin site, remove the adhesive backing from the Sensor
Pod. Hold the Sensor by the Applicator area, making sure not to touch the sticky
adhesive.
2. Place the Sensor on the site you selected, with the widest part of the pod horizontal
to the ground. You can place the Sensor flat facing to the left or right of your belly
button. Press firmly on and around the adhesive to make sure it is flat.
3. Once you have stuck the adhesive to your abdomen (belly), pull the Safety Lock out
from the Applicator. Pull near the arrow on the Safety lock, as shown below:
36 | SEVEN CONTINUOUS GLUCOSE MONITORING SYSTEM
™
Pull Safety Lock Out