Dexcom SEVEN User Manual page 97

6. To enter your SN# press the Up
number or letter.
7. Press the OK Button to accept that number/letter and to move to the next number
or letter.
8. Continue steps 6 and 7 until you have entered all 5 numbers/letters.
9. Press the OK Button once more to confirm the entire Transmitter Serial Number.
10. Pressing C at any time while entering in the new Transmitter Serial Number will
return you to the first Transmitter Serial Number Screen and the SN# will not be
changed.
11. When you have programmed the new Transmitter Serial Number check the Receiver
display in 5 minutes to make sure the Antenna Symbol appears in the lower right
corner and the two devices are communicating.
or Down Arrows until you arrive at the first
Seven System User's Guide | 93
™