NOTE
•
Make sure you hear 2 clicks when you snap the Transmitter in place (see Step 3). This
helps ensure your device is water resistant (see Section 4.4).
•
Make sure that you have the correct Transmitter Serial Number (SN#) entered into your
Receiver (for all new Receivers, the Manufacturer enters this number). See Section 7.3 for
instructions on how to enter the SN# into your Receiver.
40 | SEVEN
CONTINUOUS GLUCOSE MONITORING SYSTEM
™
Need help?
Do you have a question about the SEVEN and is the answer not in the manual?
Questions and answers