The Seven System Calibration Prompt (The End Of The Start Up Period) - Dexcom SEVEN User Manual

3.1 THE SEVEN SYSTEM CALIBRATION PROMPT
(THE END OF THE START-UP PERIOD)
Two (2) hours after Seven Sensor insertion confirmation (see Section 2.4) your Seven
Receiver will prompt you to calibrate your Sensor by vibrating and displaying the
following screen on the Receiver:
•
After you see this prompt press the
•
Take 2 fingersticks with your meter.
•
Follow the steps provided in Section 3.2 (Auto Upload) or Section3.3 (Manual Entry)
to complete System calibration.
NOTE
•
If you choose to silence the Double Blood Drop Prompt
and calibrate at a later time, the Trend Screen will display
a Blood Drop in the Status Box (upper right corner). This
indicates that BG fingerstick readings are still needed for
calibration.
•
If you silence the Double Blood Drop Prompt, it will reappear every 15 minutes for 3
hours. You will still be able to calibrate after 3 hours. The Receiver will only display a
blood drop in the Status Box as a reminder.
Double Blood Drop Prompt
C Button to clear the display.
Seven System User's Guide | 47
™