Arbitrary Positions - Cycle802 - Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual

4.
5.
9.5.4

Arbitrary positions - CYCLE802

Programming
CYCLE802 (111111111, 111111111, X0, Y0, X1, Y1, X2, Y2, X3, Y3, X4, Y4)
Parameters
Parameter Data type
PSYS INT
PSYS INT
X0 REAL
Y0 REAL
X1 REAL
Y1 REAL
X2 REAL
Y2 REAL
X3 REAL
Y3 REAL
X4 REAL
Y4 REAL
160
Press this softkey to open the window for this cycle. Parameterize the cycle as desired.
Confirm your settings with this softkey. The cycle is then automatically transferred to the program
editor as a separate block.
Description
Internal parameter, only the default value 111111111 is possible
Internal parameter, only the default value 111111111 is possible
First position in the X axis
First position in the Y axis
Second position in the X axis
Second position in the Y axis
Third position in the X axis
Third position in the Y axis
Fourth position in the X axis
Fourth position in the Y axis
Fifth position in the X axis
Fifth position in the Y axis
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA1, 01/2014