Setting User Interface Language; Turning On, Reference Point Approach - Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual

1.5

Setting user interface language

Operating sequence
1.
+
2.
3.
4.
2

Turning on, reference point approach

Note
When turning on/off the CNC and the machine, also observe the machine tool manufacturer's documentation, since turning
on and reference point approach are machine-dependent functions.
Operating sequence
1.
2.
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA1, 01/2014
Select the desired operating area.
Press this softkey to open the user interface language selection window.
Use the cursor keys to select the desired language.
Press this softkey to confirm your selection.
Note:
The HMI (Human Machine Interface) is automatically restarted when a new language is
selected.
Switch on the power supply for the control system and the machine.
Release all emergency stop buttons on the machine.
By default, the control system is in the "REF POINT" window after booting.
The symbol shown on the screen indicates that the axis is not yet referenced. If an axis is not
referenced, the symbol is always visible in the current (machining) operating area.
15