Screen Layout - Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual

Customized insertion strips
The MCP package also includes an A4-sized blank plastic sheet with detachable strips. You can customize insertion strips if
the pre-defined strips can not meet your needs.
In the \examples\MCP folder of the Toolbox DVD for the SINUMERIK 808D ADVANCED, there is a symbol library file and an
insertion strip template file. To make customized insertion strips, follow the steps below:
1. Copy the desired symbols from the symbol library file to the desired locations in the insertion strip template.
2. Print the template to the A4-sized blank plastic sheet.
3. Detach the insertion strips from the blank plastic sheet.
4. Pull out the pre-inserted strips from the MCP.
5. Insert the customized strips on the back of the MCP.
Note
This manual assumes an 808D standard machine control panel (MCP). Should you use a different MCP, the operation
may be other than described herein.
1.3

Screen layout

Alarms and messages
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA1, 01/2014
Displays active alarms with alarm text
The alarm number is displayed in white lettering on a red
background. The associated alarm text is shown in red
lettering. An arrow indicates that several alarms are active.
The number to the right of the arrow indicates the total
number of active alarms. When more than one alarm is
active, the display scrolls through the alarms in sequence.
An acknowledgement symbol indicates the alarm cancel
criterion.
Displays messages from NC programs
Messages from NC programs do not have numbers and
appear in green lettering.
13