Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual page 254
Operator-panel-based cncs
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
254
Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
● Direction of rotation: counter-clockwise
● R: 9.5
● I: 0 abs.
● RND: 2
Press this softkey to confirm.
Press this softkey to select a contour element of straight line in any direction.
Enter the parameters for this element and press this softkey to confirm.
● α1: -30 °
Press this softkey to select a contour element of circular arc.
Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
● Direction of rotation: clockwise
● R: 2
● J: 4.65 abs.
Press this softkey to confirm.
Press this softkey to select a contour element of circular arc.
Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
● Direction of rotation: counter-clockwise
● R: 3.2
● I: 11.5 abs.
● J: 0 abs.
Press this softkey to confirm.
Press this softkey to select a contour element of circular arc.
Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
● Direction of rotation: clockwise
● R: 2
● J: -4.65 abs.
Press this softkey to confirm.
Press this softkey to select a contour element of straight line in any direction.
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA1, 01/2014
Advertisement
Table of Contents
