Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual page 34

Searching for blocks
Proceed through the following steps to search for a block:
1.
2.
3.
4.
Copying, cutting, and pasting blocks
Proceed through the following steps to copy, cut, and paste blocks:
1.
2
3.
4.
34
Press this softkey in the opened program editor window.
Press this softkey to search via text. Alternatively, you can search with a given line number by
pressing the following softkey:
Enter the search text or line number in the input field. Press this key to select a starting point for
search if you choose to search via text.
Press this softkey to start the search, or otherwise, press the following softkey to cancel the search:
Press this softkey in the opened program editor window to insert a marker.
Use the cursor keys to select the desired program blocks.
Press the following softkey to copy the selection to the buffer memory:
Or
Press the following key to cut the selection to the buffer memory:
Place the cursor on the desired insertion point in the program and press this softkey.
The data is successfully pasted.
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA1, 01/2014