Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual page 260

Address Significance
G331 Thread interpolation
G332 Thread interpolation - retraction
G4 Dwell time
G63 Tapping with compensating chuck
G74 Reference point approach
G75 Fixed point approach
G147 SAR - Approach with a straight line
G148 SAR - Retract with a straight line
G247 SAR - Approach with a quadrant
G248 SAR - Retract with a quadrant
G347 SAR - Approach with a semicircle
G348 SAR - Retract with a semicircle
TRANS Translation, programmable
ROT Rotation, programmable
SCALE Programmable scaling factor
MIRROR Programmable mirroring
ATRANS Additive translation, programming
AROT Additive programmable rotation
260
Value assignments Information
2: Special motions, non-modal G4 F...;separate block, F:
3: Write memory, non-modal
Programming
N10 SPOS=... ; Spindle in
position control
N20 G331 Z... K... S... ;
tapping without compensating
chuck e.g. in Z axis; RH or LH
thread is defined via the sign
of the pitch (e.g. K+):
+ : as with M3
- : as with M4
G332 Z... K... ;Rigid tapping,
e.g. in Z axis, retraction
motion; sign of pitch as for
G331
Time in seconds
or
G4 S.... ;separate block, S: in
spindle revolutions
G63 Z... F... S... M...
G74 X=0 Y=0 Z=0; separate
block, (machine axis
identifier!)
G75 X=0 Y=0 Z=0; separate
block, (machine axis
identifier!)
G147 G41 DISR=... DISCL=...
FAD=... F... X... Y... Z...
G148 G40 DISR=... DISCL=...
FAD=... F... X... Y... Z...
G247 G41 DISR=... DISCL=...
FAD=... F... X... Y... Z...
G248 G40 DISR=... DISCL=...
FAD=... F... X... Y... Z...
G347 G41 DISR=... DISCL=...
FAD=... F... X... Y... Z...
G348 G40 DISR=... DISCL=...
FAD=... F... X... Y... Z...
TRANS X... Y... Z...; separate
block
ROT RPL=... ; rotation in the
current plane G17 to G19,
separate block
SCALE X... Y... Z... ; scaling
factor in the direction of the
specified axis, separate block
MIRROR X0; coordinate axis
whose direction is changed,
separate block
ATRANS X... Y... Z... ;
separate block
AROT RPL=... ; rotation in the
current plane G17 to G19,
separate block
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA1, 01/2014