Control Elements On The Ppu - Siemens SINUMERIK 808D ADVANCED Programming And Operating Manual

1.1.2

Control elements on the PPU

Elements on the PPU (Panel Processing Unit) front
The following illustration uses PPU161.2 as an example to show control elements available on the PPU:
① Vertical and horizontal softkeys
Calls specific menu functions
② Return key
Returns to the next higher-level menu
③ Menu extension key
Opens the next lower-level menu or navigate between
the menus of the same level
④ Alphabetic and numeric keys *
⑤
Control keys *
⑥ Alarm cancellation key
Cancels alarms and messages that are marked with
this symbol
* For more information, refer to the table below.
Further information
Alphabetic and
numeric keys
The icons on the following keys are available only with PPU161.2 and PPU160.2.
8
To enter the upper character on an alphabetic/numeric key, keep the following key
pressed:
The icon on the key is a hint that you can press both <CTRL> and this key as
shortcuts for capturing screens.
⑦ On-board wizard key
Provides step-by-step guides on basic commissioning
and operation procedures
⑧ Help key
Calls help information
⑨ Cursor keys *
⑩ Operating area keys *
⑪
USB interface *
⑫ Status LEDs *
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA1, 01/2014