Anritsu spectrum master ms2711d User Manual page 91

Chapter 3 Key Functions
set equal to the ending point of the current segment (if the current segment
is on).
Back Return to the previous menu.
Marker Menu
Pressing MARKER on the data keypad in Transmission Measurement mode activates a
menu for the six different markers. Use the corresponding softkey to select the desired
marker. Then use the marker second level menu to turn the markers on or off, and to edit
marker parameters and values.
M1 Selects the M1 marker parameter and opens the Markers second level
menu with M1 highlighted.
M2 Selects the M2 marker parameter and opens the Markers second level
menu with M2 highlighted.
M3 Selects the M3 marker parameter and opens the Markers second level
menu with M3 highlighted.
M4 Selects the M4 marker parameter and opens the Markers second level
menu with M4 highlighted.
All Off Turns off all markers.
More Press to access additional marker functions:
M5
M6
Regular
Marker
Noise
Marker
All Off
Back
Markers Second Level Menu
The markers second level menu displays when one of the markers is selected in the above
menus. For Markers M1 through M4, the second level menu is:
3-34
Selects the M5 marker parameter and opens the M5 marker
second level menu with M5 highlighted.
Selects the M6 marker parameter and opens the M6 marker
second level menu with M6 highlighted.
Measures the signal level at the point of the marker in the
unit type selected in the Amplitude - Units menu. When the
regular marker option is selected, all markers are regular
markers.
Measures noise level normalized to a 1 Hz bandwidth. The
unit of measure is dBm/Hz only. When Noise Marker is se-
lected, the detection type is automatically changed to RMS
average. When the Noise Marker option is selected, all
markers are noise markers.
Turns off all markers.
Return to the previous menu.