Anritsu spectrum master ms2711d User Manual page 146

Chapter 5 Field Measurements
Step 10. Press the Back soft key and select the M2 soft key. Move the M2 marker over
one of the spurs and press ENTER to set the marker.
Step 11. Compare the value of the marker to the specified allowable level of out-of-band
spurious emissions for the corresponding channel transmit frequency.
Step 12. Press the Delta (M2-M1) soft key to see the distance of the spur from the car-
rier.
Figure 5-9 shows a simulated out-of-band spurious signal at 21.000 MHz from the carrier.
Figure 5-9. Simulated Out-of-Band Spurious Emission Measurement
5-16