Anritsu spectrum master ms2711d User Manual page 79

Chapter 3 Key Functions
Segment
Segment
Back
Multiple Set multiple user-defined lower limits, and can be used to create a lower
Lower limit mask for quick pass/fail measurements. A lower limit will result in a
Limits failure when the data falls below the limit line. Menu choices are:
Segment
Segment
Segment
Segment
Segment
Back
Limit Turns the audible limit beep indicator on or off. When the limit beep indi-
Beep cator is on, an audible beep will occur at every data point that appears
above the upper limit or below the lower limit.
Limit Segment Menu
The Limit Segment Menu displays when a segment is selected from the Multiple Upper
Limits or Multiple Lower Limits menus above.
On/Off Turns the segment on or off.
Edit Opens the segment parameters for editing (see Adjusting Segmented
Limits, page 2-19).
Prev Edit or view the parameters of the previous segment.
Segment
Next Edit or view the parameters of the next segment. If the next segment is off
Segment when this button is pressed, the starting point of the next segment will be
set equal to the ending point of the current segment (if the current segment
is on).
Back Return to the previous menu.
3-22
View/edit the upper limit segment 4.
4
View/edit the upper limit segment 5.
5
Return to the previous menu.
View/edit the lower limit segment 1.
1
View/edit the lower limit segment 2.
2
View/edit the lower limit segment 3.
3
View/edit the lower limit segment 4.
4
View/edit the lower limit segment 5.
5
Return to the previous menu.