Changing The Configuration Software Password; Changing The Security Level - LifeSize Multipoint-12 Installation Manual

C
HANGING THE
C
ONFIGURATION
S P
OFTWARE ASSWORD
C
HANGING THE
S L
ECURITY EVEL
You can use the serial port to change the configuration software password.
Procedure
At the prompt, enter P to change the configuration software
1
password and press Enter.
The user profile screen appears as follows:
Enter user name:
Enter new password:
At the Enter user name prompt, enter the new user name and
2
press Enter.
At the Enter user password prompt, enter the new password
3
and press any key to return to the video processing module
Main menu.
You can use the serial port to change the security level. Security levels are as
follows:
0 (low)—Allows Telnet, FTP and ICMP to access the MVP.
1 (medium)—Allows only ICMP access to the MVP.
2 (high)—Allows no access to the MVP.
Procedure
At the prompt, enter S to configure the network security level
1
and press Enter.
The security level screen appears as follows:
The current security level is [0 low].
Enter a new security level (0-low, 1-medium. 2-high):
Video Processing Module Initial Configuration
Setting Up Your LifeSize Multipoint 21