Table of Contents
Advertisement
Procedure
At the prompt, enter A to access the Advanced Configuration
1
menu.
The Advanced Configuration menu appears as follows:
Advanced configuration menu
Q: Quit
1: Configure web server port
2: Restore factory configuration
3: Change Lan port Settings
4: Disable DSP reset
Select:
At the prompt, enter 1 to configure the web server port.
2
The current web port server setting displays.
At the prompt, enter 2 to restore the factory configuration
3
settings.
You are asked to confirm your choice as follows:
Select: 2
Are you sure you want to restore factory configuration?
[y, n]:
Enter y or n.
4
At the prompt, enter 3 to change Ethernet speed and duplex
5
parameters.
The network interface card settings screen appears as follows:
Choose : 1 - 10Mbps
: 2 - 100Mbps Half Duplex
: 3 - 10Mbps
: 4 - 100Mbps Full Duplex
: 5 - Auto
other - Quit
:
Enter either a number between 0 and 5 inclusive, representing
6
the required option.
Press any other key to quit without changing the network
7
working mode.
Video Processing Module Initial Configuration
Half Duplex
Full Duplex
Setting Up Your LifeSize Multipoint
23
Advertisement
Table of Contents
