Figure 2-2
Fitting a Bracket for Rack Mounting
Pass the screws through the brackets and tighten them into the
4
screw holes on each side of the LifeSize Multipoint unit using
a suitable screwdriver.
Insert the LifeSize Multipoint unit into the 19-inch rack.
5
Fasten the brackets to the side rails of the rack.
6
Make sure that the air vents at the sides of the LifeSize
7
Multipoint unit are not blocked.
Mounting the LifeSize Multipoint Unit in a 19-inch Rack
Setting Up Your LifeSize Multipoint
13