Saving Network Configuration Settings; Connecting The Mvp To The Lan - LifeSize Multipoint-12 Installation Manual

Video Processing Module Initial Configuration
S N
AVING ETWORK
C
ONFIGURATION
S
ETTINGS
C MVP
ONNECTING THE
LAN
TO THE
24 LifeSize Multipoint Installation Guide
At the prompt, enter 4 to disable the DSP reset facility.
8
After options Q and 1-3, press any key to return to the video processing
Note
module Main menu. After option 4, the video processing module Main menu
displays automatically.
Only qualified technical personnel should modify the DSP reset
Caution
function settings.
Modified network configuration settings are automatically saved when you exit
the video processing module Main menu.
Procedure
Ensure you have completed your configuration.
1
At the prompt, enter Q to exit the video processing module
2
Main menu.
The video processing module Main menu closes and your
machine will automatically reboot.
This section describes how to connect the MVP to the Local Area Network
(LAN).
Procedure
Connect the supplied LAN cable from your network switch to
1
the 10/100BaseT Ethernet port on the front panel of the MVP
unit. The 10/100BaseT port accepts an RJ-45 connector.
Turn on the power to the MVP unit.
2