LifeSize Multipoint-12 Installation Manual page 34

Accessing the LifeSize Multipoint Administrator Interface
26 LifeSize Multipoint Installation Guide
Before You Begin
The following requirements are necessary to access the LifeSize Multipoint
Administrator web interface:
A Java-compliant browser. Microsoft Internet Explorer version 5.5 or
later is recommended.
The LifeSize Multipoint unit IP address or a web link to the LifeSize
Multipoint unit.
The required user name and password.
For first-time installation, you must assign an IP address to the LifeSize
Note
Multipoint unit using a serial port connection before you can access the web
interface. For more information, see
Procedure
Launch your browser and enter the IP address or the name of
1
the LifeSize Multipoint unit followed by /admin.
For example, http://125.221.23.44/admin or
board_name/admin.
The LifeSize Multipoint access window appears.
Enter the Administrator user name and password in the
2
appropriate fields and click Go. The default global user name
is admin. The default password is <null>.
The LifeSize Multipoint Administrator interface appears.
If you try to sign in as an Administrator and another Administrator is
Note
currently signed in, the LifeSize Multipoint signs you in as a Read only user. The
words Read Only appear at the top of the window and a pop-up displays the IP
address of the Administrator already signed in. Read only users cannot edit any of
the LifeSize Multipoint settings.
Setting the IP Address on page 15.