LifeSize Multipoint-12 Installation Manual page 38

Launching the Utility
L
AUNCHING THE
U
TILITY
U
PGRADING
S
OFTWARE
30 LifeSize Multipoint Installation Guide
This section describes how to install and launch the LifeSize Software Upgrade
Utility.
Procedure
Download the relevant upgrade file from the LifeSize web site
1
at www.lifesize.com/service.
Double click the upgrade file to run the Software Upgrade
2
Utility.
The upgrade files are extracted and the Upgrade Utility dialog
box appears.
This section describes how to use the Software Upgrade Utility to upgrade
LifeSize software installed on LifeSize Multipoint.
Procedure
In the General Information section of the Upgrade Utility
1
dialog box, enter the IP address of the LifeSize Multipoint you
want to upgrade.
In the Login Information section, enter the administrator user
2
name and password for the target LifeSize Multipoint, as
configured in the LifeSize Multipoint network configuration
settings.
(Optional) Modify the read and write community settings for
3
the target LifeSize Multipoint as follows:
Click Customize SNMP Settings.
The Customize SNMP Settings dialog box displays.
Enter the required read community and write
community values.
We recommend that you modify the default settings for security
Note
purposes.