Table of Contents
Advertisement
Display
Description of Fault
Error Code
when a severe error
occurs during system
startup.
01
Motor over temp (PTC)
when using incremental
encoder feedback option.
o02 – o30
Reserved
F20o31
New Firmware detected.
This is a reminder that the
user area of the drive
memory could be corrupt
and should be reset by
reloading variables to the
drive.
o32
User memory checksum
error.
49
Drive Action
Drive disable with Fault
Drive disable with Fault
Drive disable with Fault
Reset Method
Clear Fault input, Disable/Enable,
Coldstart, GUI 'Drive Reset' Button,
or Cycle Power
Power Cycle: Code is a one-shot
warning.
Drive must be 'Reset to Factory
Default or have a previously saved
setup down loaded to it, followed by
Colstart.
Advertisement
Table of Contents
