Verify Communication Between The Director And Hafm Appliance - HP StorageWorks Director 2/64 Installation Manual

Figure 40: Domain Information dialog box (IP Address page)
3. Enter a director description in the Description field.
4. Enter the IP address you configured earlier. See
5. Enter the director subnet mask (determined by the customer network
6. If you want to generate a sequence of IP addresses, perform the following:
Note:
first three octets.
7. Click OK.

Verify Communication Between the Director and HAFM Appliance

Follow these steps to check director-to-server communication:
1. At the HAFM application main window (physical map or product list), inspect
Director 2/64 Installation Guide
Information" on page 70 for more information.
administrator) in the Subnet Mask field.
Choose the Generate a sequence of IP addresses check box.
Enter the last IP address in the Last IP field.
All IP addresses in a sequence must be on the same subnet and have the same
the shape and color of the status symbol associated with the director icon.
Table 6 explains these symbols.
Installing and Configuring the Director
"Configure Director Network
79