Table of Contents
Advertisement
This chapter describes how to prepare racks and samples for analysis,
requisition for samples, process emergency samples, perform repeat analysis,
print results, and transfer data to a host computer.
4.1 Rack and Sample Cup/Tube Preparation
4.1.1 Rack Types
4.1.2 Place the Sample Cups/Tubes in a Rack
4.2 Place a Rack on the Set Tray
4.3 Place a Set Tray on the Analyzer
4.3.1 Place Trays
4.4 Add Racks Directly to the System
4.5 Add Racks to the Priority Rack Set Unit
4.6 Requisition for Routine and Emergency Samples
4.6.1 Enter Manual Requisitions
4.6.2 Enter Batch Requisitions
4.6.3 Download Requisitions from a Host Computer
4.7 Processing Emergency Samples
4.7.1 Processing emergency samples in red racks from the priority rack
4.7.2 Processing emergency samples in red racks from the rack set unit
4.7.3 Requisition for an Emergency Sample
B00418AA
set unit
CHAPTER 4
Processing Samples
4-1
Hide quick links:
Advertisement
Table of Contents
