6
7
6.11 Reagent Inventory
Reagent volume required for each test by the day of the week can be calculated
from data obtained from the analyzer (Auto), or a value can be entered for each
test and day of the week (Manual).
Reagent Management > Main
day of the week in green. The indicator bar displays the volume based on the
"Margin" percentage calculation.
B00418AA
Type in the 20-digit reagent ID from the reagent bottle. Select
on-board stability, expiration, lot number, and bottle number updates
with a "No Volume to Process" comment.
Select
Reagent Check (F5) > Check Specified Positions
the shot count. An advisory alarm "Reagent ID Read Error" and "ID
Edit" comment display. The RB stability and cal stability update.
displays tests below the required volume for the
As Needed Tasks
6.11 Reagent Inventory
. The
OK
to update
6-33
6