2
3
4.4 Add Racks Directly to the System
When adding racks directly to the system, set them using the following
procedure. Verify that the racks are set in the correct direction.
WARNING
Never look directly into the barcode readers. The readers use lasers
that can cause serious eye damage.
B00418AA
Set the prepared trays in the rack set unit and the rack collection unit.
Figure 4.5
1. Rack stabilizing bar
2. Collection tray1
3. Slide the rack stabilizing bar forward
(present location) on the collection tray.
Close the cover.
Processing Samples
4.4 Add Racks Directly to the System
4. Set tray1
5. Set tray2
6. Collection tray2
4
4-11