This chapter describes how to perform the daily start up procedures.
3.1 Start the System
3.1.1 Turn On the System
3.1.2 Set the Start Conditions
3.2 Perform Daily Maintenance
3.3 Check Analyzer Status
3.4 ISE (Optional Unit) Start Up
3.4.1 Check the ISE Reagent
3.4.2 Perform ISE Daily Maintenance
3.5 Check Reagent Status
3.5.1 Check Reagent Quantity and Status
3.5.2 Review Detailed Information
3.5.3 Reagent Replacement
3.6 Perform Calibration
3.7 Perform Quality Control (QC)
3.8 Start Analysis
B00418AA
CHAPTER 3
Daily Start Up
3-1