Operation
6.6.9 SCR Conduction Bar Graph
The SCR conduction bar graph shows the level of
conduction on each phase.
Illustration 6.2 Bar Graph
6.6.10 Performance Graphs
®
The VLT
Soft Starter MCD 500 can show real-time
performance information for:
•
Current.
•
Motor temperature.
•
Motor kW.
•
Motor kVA.
•
Motor power factor.
The newest information is shown at the right side of the
screen. Older data is not stored. To allow past performance
to be analyzed, the graph can also be paused. To pause or
unpause the graph, press and hold [OK] for more than
0.5 s.
NOTICE
The soft starter does not collect data while the graph is
paused. When graphing resumes, a small gap is shown
between the old data and the new data.
MG17K602
Operating Guide
Danfoss A/S © 05/2016 All rights reserved.
6
6
55