Alarm Log; Trip Log; Event Log; Counters - Danfoss vlt soft starter mcd 500 Operating Manual

Hide thumbs Also See for vlt soft starter mcd 500:
Table of Contents

Advertisement

Tools

9.8 Alarm Log

The [Alarm Log] key opens the alarm logs, which contain:

Trip log.

Event log.

Counters which store information on the soft
starter operating history.
9.8.1 Trip Log
The trip log stores details of the 8 most recent trips,
including the date and time the trip happened. Trip 1 is
the most recent and trip 8 is the oldest stored trip.
To open the trip log:
1.
Press [Alarm Log].
2.
Scroll to Trip Log and press [OK].
3.
To select a trip to view, press [
press [OK] to show details.
To close the log and return to the main display, press
[Back].
9
9
9.8.2 Event Log
The event log stores time-stamped details of the 99 most
recent events (actions, warnings, and trips), including the
date and time of the event. Event 1 is the most recent and
event 99 is the oldest stored event.
To open the event log:
1.
Press [Alarm Log].
2.
Scroll to Event Log and press [OK].
3.
To select an event to view, press [
press [OK] to show details.
To close the log and return to the main display, press
[Back].

9.8.3 Counters

NOTICE
The security access code protects the counters function.
The performance counters store statistics on the soft
starter operation:
Hours run (lifetime and time since the counter
last reset).
Number of starts (lifetime and time since the
counter last reset).
Motor kWh (lifetime and time since the counter
last reset).
Number of times the thermal model has been
reset.
74
®
VLT
Soft Starter MCD 500
The resettable counters (hours run, starts, and motor kWh)
can only be reset if the correct access code is entered.
To view the counters:
1.
2.
3.
4.
To close the counter and return to the alarm logs, press
[Back].
] and [
], then
] and [
], then
Danfoss A/S © 05/2016 All rights reserved.
Press [Alarm Log].
Scroll to Counters and press [OK].
To scroll through the counters, press [
Press [OK] to view details.
To reset a counter, press [OK], then enter the
access code. Select Reset, then press [OK] to
confirm.
] and [
].
MG17K602

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents