Temperature Monitoring Screen (S1); Programmable Screen (S2); Average Current (S3); Current Monitoring Screen (S4) - Danfoss vlt soft starter mcd 500 Operating Manual

Hide thumbs Also See for vlt soft starter mcd 500:
Table of Contents

Advertisement

Operation
Motor power.
Last start information.
Date and time.
SCR conduction bar graph.
Performance graphs.
NOTICE
Screens shown here are with the default settings.

6.6.1 Temperature Monitoring Screen (S1)

The temperature screen shows the temperature of the
motor as a percentage of total thermal capacity. It also
6
6
shows which motor data set is in use.
The temperature monitoring screen is the default status
screen.
Ready
MS1
M1 000%

6.6.2 Programmable Screen (S2)

The user-programmable screen of the soft starter can be
configured to show the most important information for the
particular application. Use parameters 8-2 to 8-5 to select
which information to show.
Ready
MS1
00000 hrs

6.6.3 Average Current (S3)

The average current screen shows the average current of
all 3 phases.
Ready
MS1

6.6.4 Current Monitoring Screen (S4)

The current screen shows real-time line current on each
phase.
Ready
MS1
000.0A
54
®
VLT
Soft Starter MCD 500
000.0A
000.0kW
Primary Motor Set
000.0A
000.0kW
-.-- pf
000.0A
000.0kW
0.0A
000.0A
000.0kW
Phase currents
000.0A
Danfoss A/S © 05/2016 All rights reserved.

6.6.5 Frequency Monitoring Screen (S5)

The frequency screen shows the mains frequency as
measured by the soft starter.
Ready
MS1

6.6.6 Motor Power Screen (S6)

The motor power screen shows motor power (kW, hp, and
kVA) and power factor.
Ready
MS1
000.0kW
0000kVA
S1

6.6.7 Last Start Information (S7)

The last start information screen shows details of the most
recent successful start:
Start duration, (s).
Maximum start current drawn (as a percentage of
motor full load current)
Calculated rise in motor temperature.
Ready
MS1
Last start
S2
000% FLC

6.6.8 Date and Time (S8)

The date and time screen shows the current system date
and time (24-hour format). For details on setting the date
and time, see chapter 9.1 Set Date and Time.
Ready
MS1
S3
S4
000.0A
000.0A
000.0kW
00.0Hz
000.0A
000.0kW
0000HP
-. - - pf
000.0A
000.0kW
ΔTemp 0%
000.0A
000.0kW
YYYY MMM DD
HH:MM:SS
MG17K602
S5
S6
S7
000 s
S8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents