Motor Power Screen (S6); Last Start Information (S7); Date And Time (S8); Scr Conduction Bargraph - Danfoss mcd-500 Operating Instruction

6 Operation

6.4.6 Motor Power Screen (S6)

The motor power screen shows motor power (kW, HP and kVA) and power factor.
Ready
MS1
000.0kW
0000kVA

6.4.7 Last Start Information (S7)

The last start information screen shows details of the most recent successful start:
• start duration (seconds)
6
• maximum start current drawn (as a percentage of motor full load current)
• calculated rise in motor temperature
Ready
MS1
Last start
000 % FLC

6.4.8 Date and Time (S8)

The date/time screen shows the current system date and time (24 hour format). For details on setting the date and time, see
Ready
MS1

6.4.9 SCR Conduction Bargraph

The SCR conduction bargraph shows the level of conduction on each phase.
52
S6
000.0A 000.0kW
0000HP
-. - - pf
S7
000.0A 000.0kW
000 s
ΔTemp 0%
S8
000.0A 000.0kW
YYYY MMM DD
HH:MM:SS
MG.17.K2.02 - VLT ® is a registered Danfoss trademark
MCD 500 Operating Instruction
Set Date and Time
.