Terminal Settings Change Dialog Box; System Settings Change Dialog Box - Wyse Winterm 3200LE Administrator's Manual

1. Click on the Reset the Terminal to Factory Default Property Settings check
box. Figure 7-2 shows the dialog box that displays.
2. Click on Yes to return to the Terminal Properties dialog box.
3. Click on OK in the Terminal Properties dialog box. (The System Settings
Change dialog box displays. See "Shutting Down the Terminal" for more
information about this dialog box).
4. Click on Restart in the System Settings Change dialog box to restart the
terminal with factory defaults in effect.
Figure 7-2 System Settings Change Dialog Box

Terminal Settings Change Dialog Box

When you change terminal properties using the Setup Wizard or the Terminal
Properties dialog box, you will click on either the Finish or OK command button to
save your new settings and close the application. The Terminal Settings Change
dialog box will then display. Figure 7-3 shows the Terminal Settings Change
dialog box.
63