Calibrate Properties Sheet - Wyse Winterm 3200LE Administrator's Manual

182
External Devices

Calibrate Properties Sheet

The Calibrate properties sheet is shown in Figure 25-5.
Figure 25-5 Calibrate Properties Sheet
The Calibrate properties sheet has one command button. Click on the Calibrate
command button to begin the calibration process. A white screen with a single
crosshair in the lower left hand corner displays:
1. Touch the crosshair. The crosshair will move to the upper righthand corner.
2. Touch the crosshair. The Calibration Complete dialog box displays.
3. Follow the instructions in the Calibration Complete dialog box to complete the
calibration process.