27
PC Card Adapters for Token
Ring Networks
Your WBT supports PCMCIA RACORE token ring adapter cards. This chapter
discusses the setup for RACORE token ring card. Figure 27-1 shows the RACORE
Token Ring Adapter Settings dialog box. Use this dialog box to configure a
RACORE token ring card.
Using the RACORE - Token Ring Adapter Settings Dialog Box
To invoke this dialog box:
1. Press F2 to invoke the Terminal Properties dialog box.
2. Click on the Devices tab.
3. Click on the RACORE - TR icon in the icon container on the Devices properties
sheet.
Note
This chapter applies only to Model 3320SE, 3350SE,
3360SE and 3720SE terminals.