Te Client Connection Wizard - Automate Login Process; Configuration Of Serial Cable On Com1 Dialog Box - Wyse Winterm 3200LE Administrator's Manual

4. If you clicked on Serial:
a. Make a selection from Connect To.
b. Use the Configure command button if appropriate. (See "Using the
Configuration of Serial Cable on Com1 Dialog Box" for information about the
Configure command button).
c. Click on Next. The Automate Login Process dialog box displays. See
Figure 18-3 and proceed with these instructions.
Figure 18-3 TE Client Connection Wizard - Automate Login Process
To use the Automate Login Process dialog box:
1. Fill in the Parameters group box as appropriate using the following functions:
a. Set Initiation String - Set the scripts initiation string.
b. Wait For - Act on an selected event in the Act On list such as login.
c. Respond With - The scroll list recieves input from the Insert command
button and the Insert command button inserts an item from the scroll list.
2. Use the Add and Remove command buttons to add or remove lines from the
Script scroll list.
129