Choosing A Connection Protocol; Using The Startup Function; New Connection Dialog Box; Connection Startup Dialog Box - Wyse Winterm 3200LE Administrator's Manual

88
Connection Configuration

Choosing a Connection Protocol

The following table describes the differences between the connections available
with your WBT.
Table 11-1 New Connection Dialog Box
Connection Protocol
Citrix ICA Client
Dial-Up Client
Microsoft Remote Desktop Client
Terminal Emulation
Once you have made your selection, click on OK to proceed with creating a
connection.

Using the Startup Function

Your terminal can be set to automatically connect to a server when you turn your
terminal on. This function is set using the Connection Startup dialog box. The
following figure shows this dialog box.
Click on one of the two radio buttons in the Startup Options group box (in the
Connection Startup dialog box above) to select a start-up option:
Description
ICA (Independent Computing
Architecture) protocol, which connects
to an ICA (Winframe/Metaframe)
server. See "ICA Connections" for
further instructions about how to
create this kind of connection.
Connects using a modem and PPP
(Point-to-Point Protocol). See "Dial-Up
Connections" for further instructions
about how to create this kind of
connection.
RDP (Remote Desktop Protocol),
which connects to a WTS (Windows
Terminal Server) server. See "RDP
Connections" for further instructions
about how to create this kind of
connection.
Connects to multiple terminal
emulation applications. See "Terminal
Emulation Connections" for further
instructions about how to create this
kind of connection.