Terminal Emulation And Terminal Type - Wyse Winterm 3200LE Administrator's Manual

Table 18-1 Terminal Emulation and Terminal Type
Terminal Emulation
Select:
VT52, VT100, VT400 7-Bit (default),
or VT400 8-Bit
Select:
ANSI BBS, SCO Console, WY50,
WY50+, TVI910, TVI920, TVI925,
ADDS A2, HZ1500, or WY60, IBM
3151
Select:
IBM3270
Select:
IBM5250
Terminal Type
Then select from VT TerminalID:
vt100, vt101, vt102, vt125, vt220,
vt240, vt320, vt340, vt420 (default),
vt131, or vt132
The function is deactivated.
1. Then select from IBM 3270 Model:
3278-2-E, 3278-3-E, 3278-4-E,
3278-5-E, 3279-2, 3279-3, 3279-4,
3279-5, or 3287-1
2. Check the Right Ctrl Acts as
Enter Key or the Left Ctrl Acts as
Reset Key check boxes if you want
these functions enabled for 5250
emulation.
1. Select from IBM 5250 Model:
5291-1, 5292-2, 5251-11, 3179-2,
3196-A1, 3180-2, 3477-FC,
3477-FG, 3486-BA, 3487-HA, or
3487-HC
2. Check the Right Ctrl Acts as
Enter Key, the Left Ctrl Acts as
Reset Key, or the IBM5250
Monochrome check boxes if you
want these functions enabled for
5250 emulation.
127