Wyse Winterm 3200LE Administrator's Manual page 296

264
Getting Help
Make a basic PPP connection:
1. Click on the Configure tab in the Winterm Connection Manager to invoke
the Configure properties sheet.
2. Click on the Add command button on the Configure properties sheet to
invoke the New Connection dialog box.
3. Select from the scroll list Dial-Up Client, then click OK to invoke the Dial-Up
Configuration Wizard.
4. Set the minimum parameters for a dial up connection:
a. Enter a name for the connection in Enter a Description for Dial-Up
b. Enter a telephone number in Telephone Number in the second dialog
c. Select in the second dialog box of the wizard:
d. Select a connection from the Select Connection Below to Launch After
e. Click on the Finish command button to return to the Winterm
The connection will display in the Connections list.
Find a modem that works with your terminal:
Visit the following address to see a list of supported modems:
http://www.wyse.com/service/3000peripheral.htm
Switch between multiple sessions:
• Press Ctrl+Alt+↑ to proceed to the previous session.
• Press Ctrl+Alt+↓ to proceed to the next session.
Connection: text box in the first dialog box of the wizard.
box of the wizard.
•Serial Port (modem type)
•Use Country Code and Area Code (if appropriate)
•Appropriate Local Settings and Dialing Patterns in the Dialing
Properties dialog box (invoked by the Dialing Properties command
button)
•Appropriate Port Settings and Call Options in the Device Properties
dialog box (invoked by the Configure command button)
Dialing In list box in the third dialog box of the wizard.
Connection Manager.