Wyse Winterm 3200LE Administrator's Manual page 166

134
Connection Configuration
The following table discusses the functions of a Telnet connection.
Table 19-1 TCP/IP Telnet Configuration
Function
Port Number
Suppress
Telnet Name
Force Negotiation
Break Settings
Description
Enter the Telnet port number. The default is 23.
Use the functions of this group box as needed:
• Echo
• 3270 Regime
• TN3270E
• TN5250E
Enter the Telnet virtual terminal name. The default
depends on emulation (VT400, 7-bit, default is vt420).
Use the Binary and EOR drop-down scroll lists to
configure negotiation parameters. The default for
Binary is No and the default for EOR is No.
Use the TM with Break and CR with Break check
boxes to configure break settings.