7
Changing Terminal Properties
Terminal properties can be changed or reconfigured at any time during normal
terminal operation using the Terminal Properties dialog box. Figure 7-1 shows this
dialog box.
Using the Terminal Properties Dialog Box
Invoke the Terminal Properties dialog box by pressing the F2 key from the
Winterm Connection Manager.
The Terminal Properties dialog box consists of a total of 10 properties sheets that
can be invoked by clicking on their individual tabs. The following 6 sheets are used
to change terminal properties:
•
Network - discussed in "Network Configuration."
•
Upgrade - discussed in "FTP Pull Firmware Upgrades."
•
Security - discussed in "Security Properties."
•
Apps - discussed in "Additional Applications."
•
Devices - discussed in "Dial-Up Connections."
•
Printers - discussed in "Local Printers"
The General, SysInfo, Input, and Display properties sheets are discussed in
"General Terminal Information" and "Display and Keyboard/Mouse Configuration" in
the Winterm 3000 Series WBT Users Guide.