Wyse Winterm 3200LE Administrator's Manual page 261

Table 34-1 Security Properties Sheet
Function
Security Enable
Failover Enable
Description
This group box is used to enable terminal security and
access connection configurations. It contains the
following functions:
Security Enable
Click to enable terminal security and deactivate the
Hide Configure Tab function. By default this function
is disabled.
Hide Configure Tab
Click to enable. This function hides the Configure tab
in the Winterm Connections Manager. By default this
function is disabled.
Use this group box to manipulate connection
parameters. See "Failover" for more information.
Failover Enable
Click to enable the failover function. Enabling this
function deactivates the PingBeforeConnect function.
and activates Multiple Connect and Verbose
functions. By default this function is disabled.
Multiple Connect
Click to enable this function. Failover must be enabled
before you can access this function. By default this
function is not activated.
PingBeforeConnect
Click to enable this function. Enabling this function will
activate Verbose. By default this function is disabled.
Verbose
Click to enable the Verbose connection function. By
default the box is not activated. This function becomes
activated when either FailOver or
PingBeforeConnect is enabled.
229