Table 15-1 TCP/IP Settings Dialog Box, Continued
Function
Use Server-Assigned IP Addresses
Use Default Gateway on Remote
Network
Using the Security Settings Dialog Box
Click on the Security... command button in the second dialog box of the
Dial-Up Configuration Wizard to configure dial-up security. When this command
button is pressed, the Security Settings dialog box displays. Figure 15-2 shows
this dialog box.
Figure 15-2 Security Settings Dialog Box
Description
Click here to disable server-assigned
addresses and to activate the text
entry boxes for typing-in addresses.
By default, the text entry box is not
activated.
Click on this check box to enable this
function. By default, the function is
activated and enabled.
113