Terminal Emulation Connections; Using The Te Client Connection Wizard - Wyse Winterm 3200LE Administrator's Manual

18

Terminal Emulation Connections

Use the TE Client Connection Wizard to set up a terminal emulation connection.
Terminal emulation connections use Telnet to connect to servers.

Using the TE Client Connection Wizard

When the New Connection dialog box is invoked (see "Creating New
Connections"):
1. Use the drop-down scroll list to select Terminal Emulation.
2. Click on OK.
Following are the three dialog boxes of this wizard. When you are finished
configuring a connection, the new connection will be added to the Connection
Name list in the Winterm Connection Manager. See Figure 18-1 to view the first
dialog box of this wizard.
Note
The portions of this chapter that refer to serial, Com1 or
Com2, or parallel apply only to Model 3320SE,
3350SE, 3360SE, and 3720SE terminals.