3
Model 3350SE Terminal
Installation
This section discusses the procedures for installing the 3350SE enhanced modular
terminal. This terminal can be freestanding or, optionally, mounted on a wall. It can
instead be permanently mounted on a desktop, if desired. The paragraphs below
describe how to connect and set up the terminal in all three configurations.
Locating the Terminal
Position the terminal on a clean, horizontal surface that is free from vibration and
out of direct sunlight. Refer to "Windows-based Terminal Specifications" for
environmental specifications.
Connecting the Terminal
Make all connections to the back panel before connecting the terminal to power. A
shroud (described in "Shroud Attachment") can be installed after the cables are
connected and the terminal is mounted in place. Figure 3-1 shows the back panel
connectors.
Note
An optional wall-mount kit (P/N 920189-01) is available.
For more information call 1-800-800-WYSE (9973).
Note
A keyboard and AC power cord are supplied with U.S.
models only.