Using The Lpd Config Dialog Box; Ica Printing; Printers Properties Sheet; Lpd Config Dialog Box - Wyse Winterm 3200LE Administrator's Manual

184
External Devices

Using the LPD Config Dialog Box

To invoke this dialog box:
1. Press F2 to invoke the Terminal Properties dialog box.
2. Click on the Devices tab.
3. Click on the LPD icon in the icon container.
Table 26-1 discusses the dialog box.
Table 26-1 LPD Config Dialog Box
Function
Enable Printer
Printer Name
Port
Send Form Feed

ICA Printing

You may print to a local printer from ICA applications. This paragraph describes
how to select the driver for a connected printer.

Printers Properties Sheet

Figure 26-2 shows the Printers properties sheet. To invoke this properties sheet:
1. Press F2 to invoke the Terminal Properties dialog box.
2. Click on the Printers tab.
Description
Check this check box to enable LPD
printing to a printer connected to your
terminal.
Type in this field the name of the
enabled printer. The default for this
field is Noname.
Type in this field the virtual port
number. Virtual port is a logical device
assigned when you set up LPD
services on your server. The default
for this field is 515.
Check this check box to enable form
feeds.