3360Se Optional Cable Retaining Clip Installation - Wyse Winterm 3200LE Administrator's Manual

32
Terminal Installation
Figure 4-4 3360SE Optional Cable Retaining Clip Installation
4. Gently pull the lower ends of the shroud apart and place it over the cables.
5. Place the slots in the lower end (split end) of the shroud under the lower shroud
mounting clip, as shown in the following figure.
6. Rotate the upper end of the shroud until the top slot goes over and engages the
upper mounting clip, as shown in the following figure.
Retainer Catches
Cable Retaining
Loop