Turning On The Terminal; 3320Se Power Management Button - Wyse Winterm 3200LE Administrator's Manual

16
Terminal Installation

Turning On the Terminal

The 3320SE terminal is powered-up and operating when the power supply is
connected to AC power. To toggle the display off or on, press and release the
power management button.
See the following figure for the location of the power management button.
Figure 2-6 3320SE Power Management Button
The logo will appear on the screen, followed by:
• The Setup Wizard, if it is the first time that you have turned on your terminal.
• The Winterm Connection Manager dialog box, if the Setup Wizard has been
completed.
If desired, adjust the display's geometry and intensities to your preferences.
Adjustments to the display can be made at any time, whether or not the terminal is
connected to a server. See "Changing Terminal Properties" for more information.
Note
If the button is continuously depressed for 3-5 seconds,
the unit will perform a hard boot.